- 1/2.8” Progressive Scan CMOS
- 2048 × 1536 @ 30fps
- Ultra-low light
- H.265, H.265+
- Auto-iris, support P-iris (-P)
- -A: supports auto back focus
- 120dB WDR
- 6 behavior analyses, 1 exception detection, and 1 recognition
Specification
Camera | ||
---|---|---|
Image Sensor: | | | 1/2.8” CMOS progressive scan CMOS |
Min. Illumination: | | | Color: 0.005 Lux @ (F1.2, AGC ON), 0 Lux with IR B/W: 0.0005 Lux @ (F1.2, AGC ON), 0 Lux with IR |
Shutter time: | | | 1 s – 1/100,000 s |
Slow shutter: | | | support |
Lens Mount: | | | C/CS mount |
Auto Iris: | | | DC drive(-P: support P-Iris) |
Day& Night: | | | IR cut filter with auto switch |
Wide Dynamic Range: | | | 120 dB |
Digital noise reduction: | | | 3D DNR |
Focus: | | | ABF(-A model) |
Compression Standard | ||
Video Compression: | | | H.265+/H.265/H.264+/H.264/MJPEG |
H.264 code profile: | | | Baseline Profile/Main Profile/High Profile |
Video bit rate: | | | 32Kbps~16Mbps |
Audio Compression: | | | G.711/G.722.1/G.726/MP2L2/PCM |
Audio bit rate: | | | 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2) |
Triple Streams: | | | Yes |
Image | ||
Max. Image Resolution: | | | 2048×1536 |
Frame Rate: | | | 50Hz: 25fps (2048 × 1536, 1920 × 1080, 1280 × 960, 1280 × 720) 60Hz: 30fps (2048 × 1536, 1920 × 1080, 1280 × 960, 1280 × 720) |
Sub Stream: | | | 50Hz: 25fps (704 × 576, 640 × 480, 352 × 288, 320 × 240) 60Hz: 30fps (704 × 480, 640 × 480, 352 × 240, 320 × 240) |
Third Stream: | | | 50Hz: 25fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 576, 640 × 480, 352 × 288, 320 × 240) 60Hz: 30fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 480, 640 × 480, 352 × 240, 320 × 240) |
Image Enhancement: | | | BLC/3D DNR/Defog/EIS/HLC |
Image Settings: | | | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
Target Cropping: | | | Support |
ROI: | | | Support 4 fixed region for each stream, and dynamic face tracking |
Picture Overlay: | | | LOGO picture can be overlaid on video with 128 × 128 24bit bmp format |
Day/Night Switch: | | | Auto/Schedule/Triggered by Alarm In |
Network | ||
Network Storage: | | | microSD/SDHC/SDXC card (128G), local storage and NAS (NFS,SMB/CIFS), ANR |
Alarm Trigger: | | | Motion detection, tampering alarm, HDD full, HDD error, network disconnected, IP address conflicted, illegal login |
Protocols: | | | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour |
General Function: | | | One-key recovery, Anti-Flicker, three streams, heartbeat, mirror, password protection, video mask, Watermark, IP address filtering |
System Compatibility: | | | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
Interface | ||
Audio: | | | 1-ch 3.5 mm audio in( Mic in/Line in)/out interface, 1 build-in Microphone |
Communication Interface: | | | 1 RJ45 10M / 100M Ethernet interface and 1 RS-485 interface |
Alarm: | | | 1 input, 1 output (up to DC 24V, 1A or AC 110V, 500mA) |
Video Output: | | | 1Vp-p Composite Output (75 Ω, BNC) |
On-board storage: | | | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
Reset Button: | | | Yes |
Audio | ||
Environment Noise Filtering: | | | Support |
Audio I/O: | | | Support dual audio track, stereo |
Audio Sampling Rate: | | | 16kHz / 32kHz / 44.1kHz / 48kHz |
Smart Feature-set | ||
Behavior Analysis: | | | Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal |
Line Crossing Detection: | | | Cross a pre-defined virtual line |
Intrusion Detection: | | | Enter and loiter in a pre-defined virtual region |
Region Entrance: | | | Enter a pre-defined virtual region from the outside place |
Region Exiting: | | | Exit from a pre-defined virtual region |
Unattended Baggage: | | | Objects left over in the pre-defined region such as the baggage, purse, dangerous materials |
Object Removal: | | | Objects removed from the pre-defined region, such as the exhibits on display. |
Exception Detections: | | | Scene change detection |
Recognition: | | | Face Detection |
General | ||
Operating Conditions: | | | -30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing) |
Power Supply: | | | DC 12 V, AC 24 V, PoE (802.3af, class 0) Terminal block |
Power Consumption: | | | DC 12 V± 20%, 0.6 A, max. 6.0W AC 24V, 0.2 A, max. 6.5 W PoE (802.3af, 37V-57V), 0.1 A to 0.2 A |
Dimensions: | | | 69.8 × 58 × 145 mm (2.75″ × 2.28″ × 5.71″) |
Weight: | | | 830 g (1.83 lbs) |